Posts Tagged 1080p

60′ HDMI Cable Gold 1080p V1.3a CL-3

Written on October 27, 2009 by Home Audio

Filed Under: HDMI Cables

60' HDMI Cable Gold 1080p V1.3a CL-3

High Definition Multimedia Interface Tthe first industry-supported, uncompressed, all-digital audio/video interface. HDMI provides an interface between any audio/video source, such as a set-top box, DVD player, and A/V receiver and an audio and/or video monitor, such as a digital television (DTV). HDMI supports standard, enhanced, or high-definition video, plus multi-channel digital audio on a single cable. It transmits all ATSC HDTV standards and supports 8-channel digital audio, with bandwidth to spare to accommodate future enhancements.

(more…)

35 Ft HDMI Digital Video Cable 22awg CL-2 Rated for In-Wall, 1080p

Written on October 11, 2009 by Home Audio

Filed Under: HDMI Cables

35 Ft HDMI Digital Video Cable 22awg CL-2 Rated for In-Wall, 1080p

Features: 22awg Wire – HDMI cables are generally sold in 5 different wire gauges (30, 28, 26, 24, and 22). The smaller the wire gauge number, the thicker the wire that is used inside the cable. The wire gauge is the most important factor to consider when buying an HDMI cable that is 25 feet or longer. This cable uses 22awg wire, so it is very good for running cables of 25, 35, and 50 feet reliably. Most equipment should be able to attain a 1080p signal with 25, 35, and 50 foot cables without the need for an equalizer/extender. (With 75 and 100 foot cables, an equalizer may be needed on the end of the cable run to achieve 1080p resolution.) The only caution is that the thicker wire may make the cable a bit less flexible for installation, and care should be taken to ensure that the heavier cable is not putting strain on the port of the equipment being used. See our 8 inch Port Saver cable (part # HH-28-008F) to help alleviate this potential problem. CL-2 Rated – This cable is CL-2 fire-rated. CL-2 is a National Electrical code rating. CL-2 cables have a voltage rating of up to 150 volts, and are more resistant to the spread of fire than non-CL-2 cables. In order to pass electrical inspection in many states, you must have a CL-2 rated cable. The fumes given off by non-CL-2 rated cables in a fire can be extremely toxic and deadly, so we strongly recommend CL-2 cables whenever possible. Disclaimer: State and local building codes may vary. (more…)

RiteAV – HDMI 1.3 Cable 22AWG 1080p – 75 ft.

Written on September 9, 2009 by Home Audio

Filed Under: HDMI Cables

RiteAV - HDMI 1.3 Cable 22AWG 1080p - 75 ft.

Used to Connect any receiver, TV, DVD player, switch or splitter with HDMI ports.

(more…)

50 Ft HDMI Digital Video Cable 22awg CL-2 Rated for In-Wall, 1080p

Written on August 31, 2009 by Home Audio

Filed Under: HDMI Cables

50 Ft HDMI Digital Video Cable 22awg CL-2 Rated for In-Wall, 1080p

Features: 22awg Wire – HDMI cables are generally sold in 5 different wire gauges (30, 28, 26, 24, and 22). The smaller the wire gauge number, the thicker the wire that is used inside the cable. The wire gauge is the most important factor to consider when buying an HDMI cable that is 25 feet or longer. This cable uses 22awg wire, so it is very good for running cables of 25, 35, and 50 feet reliably. Most equipment should be able to attain a 1080p signal with 25, 35, and 50 foot cables without the need for an equalizer/extender. (With 75 and 100 foot cables, an equalizer may be needed on the end of the cable run to achieve 1080p resolution.) The only caution is that the thicker wire may make the cable a bit less flexible for installation, and care should be taken to ensure that the heavier cable is not putting strain on the port of the equipment being used. See our 8 inch Port Saver cable (part # HH-28-008F) to help alleviate this potential problem. CL-2 Rated – This cable is CL-2 fire-rated. CL-2 is a National Electrical code rating. CL-2 cables have a voltage rating of up to 150 volts, and are more resistant to the spread of fire than non-CL-2 cables. In order to pass electrical inspection in many states, you must have a CL-2 rated cable. The fumes given off by non-CL-2 rated cables in a fire can be extremely toxic and deadly, so we strongly recommend CL-2 cables whenever possible. Disclaimer: State and local building codes may vary. (more…)

20 Ft Hdmi Highend Premium Cable 24k Gold 1080P By Mactop (HDG20)

Written on August 28, 2009 by Home Audio

Filed Under: HDMI Cables

20 Ft Hdmi Highend Premium Cable 24k Gold 1080P By Mactop (HDG20)

Certified Version 1.3a HDMI transfers at 10.2 Gigabytes per second. This will be a top of the line cable for a long time.
Supports 1080p Full HD picture quality and Supports up to 1440p(future proofed)
Category 2 Certified , 26 AWG, Oxygen Free Copper Vapor-Infused catalyst

(more…)

50′ HDMI Cable Gold 1080p V1.3a CL-3

Written on August 28, 2009 by Home Audio

Filed Under: HDMI Cables

50' HDMI Cable Gold 1080p V1.3a CL-3

High Definition Multimedia Interface Tthe first industry-supported, uncompressed, all-digital audio/video interface. HDMI provides an interface between any audio/video source, such as a set-top box, DVD player, and A/V receiver and an audio and/or video monitor, such as a digital television (DTV). HDMI supports standard, enhanced, or high-definition video, plus multi-channel digital audio on a single cable. It transmits all ATSC HDTV standards and supports 8-channel digital audio, with bandwidth to spare to accommodate future enhancements.

(more…)

Featured: Student Aid

25 Ft HDMI 1.3 Digital Video Cable 22awg CL-2 Rated for In-Wall, 1080p

Written on August 25, 2009 by Home Audio

Filed Under: HDMI Cables

25 Ft HDMI 1.3 Digital Video Cable 22awg CL-2 Rated for In-Wall, 1080p

Features: HDMI 1.3 Category 2 Certified – This cable is HDMI 1.3 Category 2 Certified. Many other companies are calling their HDMI 1.2 cables “HDMI 1.3 ready” – but this is NOT the same as being HDMI 1.3 certified. The new HDMI 1.3 spec doubles the bandwidth of the original HDMI standard and has opened the door for a host of potential new advancements in home theater audio/video performance. New features such “Deep Color”, higher color gamut, and high resolution, multi-channel audio formats like Dolby True HD and DTS-HD Master Audio will make higher bandwidth demands than ever before. Equipment manufacturers are bringing out new devices to take advantage of these new features. Category 2 testing ensures that the standard set by these new requirements are adhered to.Be ready for what the future has in store with STSI’s HDMI 1.3a, Category 2 certified cables. These cables have been designed to meet the high bandwidth performance standards set by HDMI 1.3a and have passed stringent Category 2 testing. These cables are constructed to the highest quality with full triple layer shielding from end to end, strong, solid wire welds and the highest quality materials including high purity copper, gold plated connectors, and tin plated conduits. Supports HDMI 1.2 – While supporting the new HDMI 1.3 spec, this cable is also backwards compatible with all HDMI 1.2 devices. 22awg Wire – HDMI cables are generally sold in 5 different wire gauges (30, 28, (more…)

40 FT Premium 1.3B1 HDMI Cable 22AWG 4 PS3 HDTV 1080p G

Written on August 18, 2009 by Home Audio

Filed Under: HDMI Cables

40 FT Premium 1.3B1 HDMI Cable 22AWG 4 PS3 HDTV 1080p G

ULTRA PERMIUM! 100% SATISFACTION GURANTEED!
An Excellent Choice for Your High-Definition Video Needs

Compatible with PlayStation 3, XBOX 360, HD Cable Box, DVD/BlueRay Players and all HDMI compatible devices and displays.

Materials

You have spent tens of thousands of $$ on your home entertainment system, we understand you don’t want the last few feets of cable to ruin the quality of your entire setup. However, you know premium brand cables are overpriced as well, you DON’T want to be ripped off!

Our Cable is the Solution. Our cables are constructed with the same material and precisions as the premium brands being sold in the retail stores. However, we don’t spend the marketing dollar and high retail markups which YOU have to pay if you purchase the premium cables in a retail store.

1. 24K Gold plated connector for the best conductivity and to ensures lossless data transmission.
2. Heavy Duty METAL HOUSING that cuts out any unwanted RF interference. The metal housing also provides great protection for the connectors.
3. Highest-grade oxygen-free copper
4. Vapor-Infused Dielectric and Triple Internal Shielding for the Highest Resolution Picture; Best signal transmission and minimized interference.
5. Above industry standard Ultra Dense Copper Braided Shielding.
6. HDMI 19 pins/ HDMI 19 pins design specs.
7.
Ultra Heavy Duty Premium Quality Nylon Mash
8. Superior Professional Build-Quality & Construction
9. 100% Pure Digital, Ulti (more…)

Component Video + Audio to HDMI Converter, 1080p Compatible

Written on August 16, 2009 by Home Audio

Filed Under: HDMI Cables

Component Video + Audio to HDMI Converter, 1080p Compatible

This product converts 3 RCA Component Video (YPbPr) and a digital coaxial (SPDIF) audio signal to an HDMI audio/video signal. This converter’s high precision digital conversion technique ensures a high quality picture for clean, crisp resolution. This unit supports up to 1080p, but will only output the resolution being fed into it by the component device. In other words, if your component video DVD player is feeding it a 480p signal, the HDMI signal coming out the other end will be 480p. It does not upconvert. Also be aware that there is no official specification for 1080p over component video. As a result, most, if not all devices, will not output a 1080p signal on component video. Package Includes:Main Unit (Metal casing) 5V DC Power Adapter Operating Instructions Foam Feet Features:HDMI 1.2 Support DTV/HDTV Resolutions of 480i, 576i, 480p, 576p, 720p, 1080i, and 1080p. Supports optional video formats: EIA/CEA-861-B Power Consumption: 10 Watts (more…)

35 FT HDMI Cable Gold with Ferrite 1080P ver 1.3 – 35ft

Written on August 12, 2009 by Home Audio

Filed Under: HDMI Cables

35 FT HDMI Cable Gold with Ferrite 1080P ver 1.3 - 35ft

HDMI provides an interface between an audio / video source, such as set top box, DVD player, PVR, audio video receiver and or a video monitor such as a HDTV or Digital television.
About Ferrite core: A ferrite bead is simply a hollow bead or cylinder made of ferrite. It slips over the cable when the cable is made. The bead is encased in plastic — if you cut the plastic, all that you would find inside is a black metal cylinder.

Why did we put it on these cables We went to the added expense as we want our cables to work GREAT.. Not good but GREAT.

The last thing you want is any interference on that new TV.
* HDMI Certified Version 1.3b – Also fully backwards compatable to work with all previous versions
* Category 2 Cable – tested to carry up to a 340MHz signal
* Supports full 1080p – The highest industry standard
* Supports Deep Color over HDMI
* High Speed Performance – The highest rating the industry has established
* Ferrite Core – To ensure a clean and clear signal at point of entry and exit of the signal
* Oxygen Free Copper Vapor-Infused catalyst for improved Signal Transfer
* Gold HDMI Connectors – Ensuring a clean clear connection
* Transfer Rate of 10.2 Gbps
* Full support for the New Blue-ray Disc players
* Tripple Layer Shielding – This is a very well constructed cable to ensure signal integrity
* 19 Pin Connectors
* Professional grade cable for transferring high-bandwidth, uncompressed digital video, multi-channel d (more…)